UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21119
                        
                            Issued:2000-10-13
                    
                            Revised:2019-11-07
                    
                            Style
                            21119
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 150 Vac, Cable flame.
		
			Conductor36 AWG - 9 AWG, solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors laid parallel or cabled together to form a flat, oval or round cable. Conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. The use of a barrier layer and/or fillers is optional. Cable may contain Labeled Flat Ribbon Style AWM which may be rolled or spiralled and formed around fillers or bunched singles. Fillers and/or tape wrap or extruded covering may be used.
		
			ShieldOptional. The shield may be over one or more of the insulated conductors or applied between the conductor assembly and the optional covering.
		
			CoveringOptional.
		
			JacketFRPE
		
			dia. in inches
		
			1.000 or less30 mils min average24 mils minimum at any point
		
			1.001-1.500 dia45 avg36 min
		
			1.501-2.500 dia60 avg48 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21119	Issued:2000-10-13
			Revised:2019-11-07


Rating	80 deg C, 150 Vac, Cable flame.

Conductor	36 AWG - 9 AWG, solid or stranded.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors laid parallel or cabled together to form a flat, oval or round cable. Conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. The use of a barrier layer and/or fillers is optional. Cable may contain Labeled Flat Ribbon Style AWM which may be rolled or spiralled and formed around fillers or bunched singles. Fillers and/or tape wrap or extruded covering may be used.

Shield	Optional. The shield may be over one or more of the insulated conductors or applied between the conductor assembly and the optional covering.

Covering	Optional.

Jacket	FRPE
	dia. in inches
	1.000 or less	30 mils min average	24 mils minimum at any point
	1.001-1.500 dia	45 avg	36 min
	1.501-2.500 dia	60 avg	48 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment.