UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21121
                        
                            Issued:2000-11-09
                    
                            Revised:2011-09-26
                    
                            Style
                            21121
                        
                            Multiconductor Cable With Extruded Non-Integral Jacket
                    
			Rating80 deg C, 90 Vac, Cable flame (external use), Horizontal Flame (internal use).
		
			Conductor30 AWG - 16 AWG.
		
			InsulationExtruded HDPE, 7 mils minimum average thickness, 6 mils minimum thickness at any point.
		
			AssemblyConsists of two conductors, twisted pairs or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval or round cable construction. Lay not specified. Barrier layer and/or fillers optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.
		
			JacketExtruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection not subject to mechanical abuse.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21121	Issued:2000-11-09
			Revised:2011-09-26


Rating	80 deg C, 90 Vac, Cable flame (external use), Horizontal Flame (internal use).

Conductor	30 AWG - 16 AWG.

Insulation	Extruded HDPE, 7 mils minimum average thickness, 6 mils minimum thickness at any point.

Assembly	Consists of two conductors, twisted pairs or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval or round cable construction. Lay not specified. Barrier layer and/or fillers optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.

Jacket	Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection not subject to mechanical abuse.