UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21126
                        
                            Issued:2001-01-24
                    
                            Revised:2019-11-07
                    
                            Style
                            21126
                        
                            Multiple conductor cable using extruded non-integral jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor36 AWG minimum, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure. The designations of all styles of individual conductors used in making up the cable assembly shall be available.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; thermoplastic covering, or thermoplastic-tape wrap.
		
			ShieldOptional - Location not specified.
		
			JacketExtruded TPU
		
			major dia. in inches
		
			0.700 or less30 mils min average24 mils min at any point
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			1.501-2.5008064
		
			2.501-4.00011088
		
			4.001 and larger140112
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21126	Issued:2001-01-24
			Revised:2019-11-07


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	36 AWG minimum, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedure. The designations of all styles of individual conductors used in making up the cable assembly shall be available.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; thermoplastic covering, or thermoplastic-tape wrap.

Shield	Optional - Location not specified.

Jacket	Extruded TPU
	major dia. in inches
	0.700 or less	30 mils min average	24 mils min at any point
	0.701-1.000	45	36
	1.001-1.500	60	48
	1.501-2.500	80	64
	2.501-4.000	110	88
	4.001 and larger	140	112

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.