UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21130
                        
                            Issued:2001-01-26
                    
                            Revised:2012-04-20
                    
                            Style
                            21130
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, 60 Vac, Horizontal flame.
		
			Conductor50 AWG min.

			InsulationExtruded PVC, extruded foamed PVC, extruded XLPVC, extruded PE, extruded foamed PE, extruded XLPE, extruded FRPE, extruded foamed FRPE, extruded XLFRPE, extruded Polyester or extruded foamed polyester, or extruded XLPolyester, 2 mils min average.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and or fillers optional. Two or three conductors and or conductor groups may be laid parallel to form flat cable. The assembly - insulated conductors with optional inner shield, optional inner covering, optional middle covering, optional middle shield, optional outer covering, optional outer shield and overall jacket. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldInner, middle and outer shield are optional.
		
			CoveringInner and outer covering- (Optional)Extruded PVC, 2 mils minimum at any point, or Polyester film, thickness not specified. Middle covering- (optional)Extruded PVC, Polyamide, Polyester or Lacquered Braid.
		
			JacketExtruded FRPE, 15 mils min average, 12 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21130	Issued:2001-01-26
			Revised:2012-04-20


Rating	60 deg C, 60 Vac, Horizontal flame.

Conductor	50 AWG min.

Insulation	Extruded PVC, extruded foamed PVC, extruded XLPVC, extruded PE, extruded foamed PE, extruded XLPE, extruded FRPE, extruded foamed FRPE, extruded XLFRPE, extruded Polyester or extruded foamed polyester, or extruded XLPolyester, 2 mils min average.

Assembly	Two or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and or fillers optional. Two or three conductors and or conductor groups may be laid parallel to form flat cable. The assembly - insulated conductors with optional inner shield, optional inner covering, optional middle covering, optional middle shield, optional outer covering, optional outer shield and overall jacket. Manufacturer shall maintain a complete description of each assembly.

Shield	Inner, middle and outer shield are optional.

Covering	Inner and outer covering- (Optional)Extruded PVC, 2 mils minimum at any point, or Polyester film, thickness not specified. Middle covering- (optional)Extruded PVC, Polyamide, Polyester or Lacquered Braid.

Jacket	Extruded FRPE, 15 mils min average, 12 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.