UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21132
                        
                            Issued:2001-03-05
                    
                            Revised:2012-08-17
                    
                            Style
                            21132
                        
                            Multiple-Conductor Cable with Extruded Non-Integral Jacket
                    
			Rating90 deg C, 1000 Vac, Cable flame
		
			Conductor40 AWG minimum solid or stranded
		
			Insulated ConductorLabeled or complying with Manufacturer's AWM Procedure
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional
		
			CoveringOptional - Extruded PVC, 6 mils minimum thickness at any point
		
			JacketExtruded PVC
		
			@Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch60 mils48 mils
		
			1.001-1.500 inch80 mils64 mils
		
			1.501-2.500 inch110 mils88 mils
		
			@ Major diameter if cable is flat or oval
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral
		
			UseInternal wiring or external interconnect of electronic equipment
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21132	Issued:2001-03-05
			Revised:2012-08-17


Rating	90 deg C, 1000 Vac, Cable flame

Conductor	40 AWG minimum solid or stranded

Insulated Conductor	Labeled or complying with Manufacturer's AWM Procedure

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional

Covering	Optional - Extruded PVC, 6 mils minimum thickness at any point

Jacket	Extruded PVC
	@Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	60 mils	48 mils
	1.001-1.500 inch	80 mils	64 mils
	1.501-2.500 inch	110 mils	88 mils

	@ Major diameter if cable is flat or oval

Standard	Appliance Wiring Material UL 758.

Marking	General

Use	Internal wiring or external interconnect of electronic equipment