UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21137
                        
                            Issued:2001-03-29
                    
                            Revised:2012-04-18
                    
                            Style
                            21137
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating75 deg C, 600 Vac, Horizontal flame.
		
			ConductorMinimum 50 AWG. Solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			JacketExtruded PVC, 15 mils minimum average thickness, 12 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21137	Issued:2001-03-29
			Revised:2012-04-18


Rating	75 deg C, 600 Vac, Horizontal flame.

Conductor	Minimum 50 AWG. Solid or stranded.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Jacket	Extruded PVC, 15 mils minimum average thickness, 12 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.