UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21142
                        
                            Issued:2001-04-13
                    
                            Revised:2017-08-24
                    
                            Style
                            21142
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket.
                    
			Rating60 deg C, 30 Vac, Cable flame.
		
			Conductor36 AWG min. solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure and having a min rating of 60 deg. C and 30 V.  The designations of all styles of individual conductors used in making up the cable assembly shall be available.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; thermoplastic covering, or thermoplastic-tape wrap.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded TPU.
		
			Dia of Cable Under Jacket - In.Min. Average Thickness - MilsMin. At Any Point Thickness - Mils
		
			0.700 or less3024
		
			0.701 - 1.0004536
		
			1.001 - 1.5006048
		
			1.501 - 2.5008064
		
			2.501 - 4.00011088
		
			4.001 and larger140112
		
			- Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21142	Issued:2001-04-13
			Revised:2017-08-24


Rating	60 deg C, 30 Vac, Cable flame.

Conductor	36 AWG min. solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedure and having a min rating of 60 deg. C and 30 V. The designations of all styles of individual conductors used in making up the cable assembly shall be available.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; thermoplastic covering, or thermoplastic-tape wrap.

Covering	Optional.

Shield	Optional.

Jacket	Extruded TPU.
	Dia of Cable Under Jacket - In.	Min. Average Thickness - Mils	Min. At Any Point Thickness - Mils
	0.700 or less	30	24
	0.701 - 1.000	45	36
	1.001 - 1.500	60	48
	1.501 - 2.500	80	64
	2.501 - 4.000	110	88
	4.001 and larger	140	112
	- Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.