UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21146
                        
                            Issued:2001-05-23
                    
                            Revised:2011-10-24
                    
                            Style
                            21146
                        
                            Multi-conductor cable using non-integral jacket.
                    
			Rating105 deg C, 300 Vac, Cable flame, Oil Resistant 60 or 80C (whichever is applicable), Gasoline Resistant.
		
			Conductor22-10 AWG, solid or stranded.
		
			InsulationExtruded FEP, 22 - 19 AWG 7.5 mils min average, 6.5 mils min at any point. 18 - 10 AWG 10 mils min avg, 9 mils min at any point.
		
			AssemblyIndividually insulated conductors cabled together. The length of lay of the twisted conductors is not specified. 1420 Denier Kevlar filler may be used. A barrier layer, if employed, may be polyester or a thermoplastic-tape wrap.
		
			JacketExtruded PVC
		
			Diameter under jacket in inchMin average thickness milsMin average thickness mils
		
			0-0.7003024
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			1.501-2.5008064
		
			CoveringExtruded Nylon, 5.0 min at any point. Recognized Component (QMTT2) nylon jacket compounds rated gasoline resistant
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21146	Issued:2001-05-23
			Revised:2011-10-24


Rating	105 deg C, 300 Vac, Cable flame, Oil Resistant 60 or 80C (whichever is applicable), Gasoline Resistant.

Conductor	22-10 AWG, solid or stranded.

Insulation	Extruded FEP, 22 - 19 AWG 7.5 mils min average, 6.5 mils min at any point. 18 - 10 AWG 10 mils min avg, 9 mils min at any point.

Assembly	Individually insulated conductors cabled together. The length of lay of the twisted conductors is not specified. 1420 Denier Kevlar filler may be used. A barrier layer, if employed, may be polyester or a thermoplastic-tape wrap.

Jacket	Extruded PVC
	Diameter under jacket in inch	Min average thickness mils	Min average thickness mils
	0-0.700	30	24
	0.701-1.000	45	36
	1.001-1.500	60	48
	1.501-2.500	80	64

Covering	Extruded Nylon, 5.0 min at any point. Recognized Component (QMTT2) nylon jacket compounds rated gasoline resistant

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment.