UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21162
                        
                            Issued:2001-07-11
                    
                            Revised:2012-03-23
                    
                            Style
                            21162
                        
                            Single or Multiple-Conductor Cable with Extruded Integral Insulation and Jacket
                    
			Rating60, 80, 90 deg C, 30 Vac, Horizontal flame.
		
			Conductor50 AWG minimum.
		
			InsulationIntegral with Jacket. Extruded ETFE or FEP or PFA or PTFE, TFE, 2 mils minimum average thickness.
		
			AssemblyInsulated single or group of insulated singles laid parallel or twisted together, with optional inner covering, optional middle covering, optional inner or outer shield, optional outer covering, length of lay not specified. Barrier layer or fillers optional. Either inner or outer shield is required, additional shield optional.
		
			ShieldInner - (Optional) Required if outer shield not provided. Outer Shield - (Optional) Required if inner shield not provided.  Material not specified.
		
			CoveringInner Covering - (Optional) Extruded PVC, Polyethylene or Irradiated Polyethylene, or PFA, or Polyester film. Thickness not specified.
 
Middle covering - (Optional) Extruded PVC, or PFA, Polyamide, Polyester, PVDF, FEP or PTFE, ECTFE, ETFE, or lacquered braid, or heat sealed PVC tape,or tape wrapped PTFE Polyester film or Polyester-Polyethylene laminated film. Thicknesses not specified. 

Outer Covering - (Optional) REQUIRED IF OUTER SHIELD IS PROVIDED. Extruded PVC, or PFA,  Polyamide, Polyester, PVDF, FEP, PTFE, ECTFE, ETFE, irradiated PE, irradiated PVC Polyurethane,or heat sealed PVC tape, or lacquered braid, thicknesses not specified.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits of electronic equipment or as insulated single in jacketed multiconductor cables.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21162	Issued:2001-07-11
			Revised:2012-03-23


Rating	60, 80, 90 deg C, 30 Vac, Horizontal flame.

Conductor	50 AWG minimum.

Insulation	Integral with Jacket. Extruded ETFE or FEP or PFA or PTFE, TFE, 2 mils minimum average thickness.

Assembly	Insulated single or group of insulated singles laid parallel or twisted together, with optional inner covering, optional middle covering, optional inner or outer shield, optional outer covering, length of lay not specified. Barrier layer or fillers optional. Either inner or outer shield is required, additional shield optional.

Shield	Inner - (Optional) Required if outer shield not provided. Outer Shield - (Optional) Required if inner shield not provided. Material not specified.

Covering	Inner Covering - (Optional) Extruded PVC, Polyethylene or Irradiated Polyethylene, or PFA, or Polyester film. Thickness not specified. Middle covering - (Optional) Extruded PVC, or PFA, Polyamide, Polyester, PVDF, FEP or PTFE, ECTFE, ETFE, or lacquered braid, or heat sealed PVC tape,or tape wrapped PTFE Polyester film or Polyester-Polyethylene laminated film. Thicknesses not specified. Outer Covering - (Optional) REQUIRED IF OUTER SHIELD IS PROVIDED. Extruded PVC, or PFA, Polyamide, Polyester, PVDF, FEP, PTFE, ECTFE, ETFE, irradiated PE, irradiated PVC Polyurethane,or heat sealed PVC tape, or lacquered braid, thicknesses not specified.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits of electronic equipment or as insulated single in jacketed multiconductor cables.