UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21164
                        
                            Issued:2001-07-28
                    
                            Revised:2019-12-13
                    
                            Style
                            21164
                        
                            Multiconductor Cable with Extruded Non- Integaral Jacket.
                    
			Rating80 deg C, 150 Vac, Horizontal flame.
		
			ConductorMin. 40 AWG solid or stranded round.
		
			InsulationLabeled or complies with manufacturer`s AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable.Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			JacketTPU*
		
			diameter of cable under jacket in inchMinimum average thicknessMinimum thickness at any point
		
			0.425 or less45 mils36 mils
		
			0.426-0.70060 mils48 mils
		
			0.701-1.50080 mils64 mils
		
			1.501-2.500110 mils88 mils
		
			2.501 and larger140 mils112 mils
		
			* - Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseAs internal wiring of equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21164	Issued:2001-07-28
			Revised:2019-12-13


Rating	80 deg C, 150 Vac, Horizontal flame.

Conductor	Min. 40 AWG solid or stranded round.

Insulation	Labeled or complies with manufacturer`s AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable.Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Jacket	TPU*
	diameter of cable under jacket in inch	Minimum average thickness	Minimum thickness at any point
	0.425 or less	45 mils	36 mils
	0.426-0.700	60 mils	48 mils
	0.701-1.500	80 mils	64 mils
	1.501-2.500	110 mils	88 mils
	2.501 and larger	140 mils	112 mils
	* - Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	As internal wiring of equipment.