UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21178
                        
                            Issued:2001-11-28
                    
                            Revised:2011-10-07
                    
                            Style
                            21178
                        
                            Muticonductor cable using non-integral jacket
                    
			Rating75, 80, 90 deg C, 600, 1000 Vac, Horizontal flame, Cable flame, Optional - 60 or 75 deg Oil.
		
			Conductor40 AWG - 2000 kcmil.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. Extruded PVC, 6 mil minimum thickness.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inches or less50 mils40 mils
		
			0.701-1.000 inches60 mils48 mils
		
			1.001-1.500 inches80 mils64 mils
		
			1.501-2.500 inches110 mils88 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment. Or External or Internal Wiring of Appliances where exposed to oil at a temperature not exceeding 60 deg. C or 75 deg. C (whichever is applicable)
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21178	Issued:2001-11-28
			Revised:2011-10-07


Rating	75, 80, 90 deg C, 600, 1000 Vac, Horizontal flame, Cable flame, Optional - 60 or 75 deg Oil.

Conductor	40 AWG - 2000 kcmil.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. Extruded PVC, 6 mil minimum thickness.

Jacket	Extruded PVC
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inches or less	50 mils	40 mils
	0.701-1.000 inches	60 mils	48 mils
	1.001-1.500 inches	80 mils	64 mils
	1.501-2.500 inches	110 mils	88 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment. Or External or Internal Wiring of Appliances where exposed to oil at a temperature not exceeding 60 deg. C or 75 deg. C (whichever is applicable)