UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21180
                        
                            Issued:2001-12-07
                    
                            Revised:2012-03-15
                    
                            Style
                            21180
                        
                            Multiple-conductor cable.
                    
			Rating200 deg C, 600 V.
		
			Conductor18 AWG - 12 AWG strands over 0.015 in stranded.
		
			Conductive CoreOver the conductor is an extruded semi-conductor high temperature thermoplastic.
		
			InsulationExtruded FEP or Extruded MFA or Extruded PFA, 20 mils min average, 18 mils minimum at any point.
		
			AssemblyTwo to three conductors. Consists of the conductive core with insulation, optional inner covering, required shield, optional outer covering.
		
			ShieldRequired.
		
			Inner CoveringOptional. Extruded PFA, FEP or MFA; 12 mils min at any point.
		
			Outer CoveringOptional. Extruded PFA, FEP or MFA; 13 mils min at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UsePipe-heating cable where the acceptability of the combination is to be determined by Underwriters Laboratories LLC.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21180	Issued:2001-12-07
			Revised:2012-03-15


Rating	200 deg C, 600 V.

Conductor	18 AWG - 12 AWG strands over 0.015 in stranded.

Conductive Core	Over the conductor is an extruded semi-conductor high temperature thermoplastic.

Insulation	Extruded FEP or Extruded MFA or Extruded PFA, 20 mils min average, 18 mils minimum at any point.

Assembly	Two to three conductors. Consists of the conductive core with insulation, optional inner covering, required shield, optional outer covering.

Shield	Required.

Inner Covering	Optional. Extruded PFA, FEP or MFA; 12 mils min at any point.

Outer Covering	Optional. Extruded PFA, FEP or MFA; 13 mils min at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Pipe-heating cable where the acceptability of the combination is to be determined by Underwriters Laboratories LLC.