UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21181
                        
                            Issued:2001-12-07
                    
                            Revised:2011-08-16
                    
                            Style
                            21181
                        
                            Multiple conductor cable using extruded non-integral jacket
                    
			Rating200 deg C, 600 Vac, Horizontal flame.
		
			Conductor18 AWG - 12 AWG strands over an 0.015 in stranded conductive core.  Over the conductor is an extruded semi-conductor high temperature thermoplastic insulation.
		
			InsulationExtruded FEP or MFA or PFA, 20 mils minimum average thickness, 18 mils minimum thickness at any point.
		
			AssemblyTwo to three conductors. The conductive cores with insulation, required shield and overall jacket.
		
			ShieldRequired.
		
			JacketExtruded FEP or MFA or PFA, 13 mils minimum average thickness, 10 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UsePipe-heating cable where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21181	Issued:2001-12-07
			Revised:2011-08-16


Rating	200 deg C, 600 Vac, Horizontal flame.

Conductor	18 AWG - 12 AWG strands over an 0.015 in stranded conductive core. Over the conductor is an extruded semi-conductor high temperature thermoplastic insulation.

Insulation	Extruded FEP or MFA or PFA, 20 mils minimum average thickness, 18 mils minimum thickness at any point.

Assembly	Two to three conductors. The conductive cores with insulation, required shield and overall jacket.

Shield	Required.

Jacket	Extruded FEP or MFA or PFA, 13 mils minimum average thickness, 10 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Pipe-heating cable where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.