UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21182
                        
                            Issued:2001-12-11
                    
                            Revised:2011-09-26
                    
                            Style
                            21182
                        
                            Laminated Flat Cable.
                    
			Rating105 deg C, 30 Vac, Horizontal flame.
		
			Conductor42 AWG - 12 AWG flat or round , material not specified. If flat, 0.5-10.0 mils thick, 10-100 mils wide.
		
			Insulation0.4 mils minimum Polyimide Film bonded each side with 0.4 mil minimum epoxy resin adhesive. 10 mils minimum edge width and 3 mils minimum between conductors.
		
			AssemblyTwo to 150 conductors laid straight or irregular parallel in one plane. Insulation bonded each side with 0.4 mil minimum epoxy resin adhesive.  10 mils minimum edge width and 3 mils minimum between conductors.
		
			ShieldOptional. Metal faced polyester tape. Drain wire -  optional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21182	Issued:2001-12-11
			Revised:2011-09-26


Rating	105 deg C, 30 Vac, Horizontal flame.

Conductor	42 AWG - 12 AWG flat or round , material not specified. If flat, 0.5-10.0 mils thick, 10-100 mils wide.

Insulation	0.4 mils minimum Polyimide Film bonded each side with 0.4 mil minimum epoxy resin adhesive. 10 mils minimum edge width and 3 mils minimum between conductors.

Assembly	Two to 150 conductors laid straight or irregular parallel in one plane. Insulation bonded each side with 0.4 mil minimum epoxy resin adhesive. 10 mils minimum edge width and 3 mils minimum between conductors.

Shield	Optional. Metal faced polyester tape. Drain wire - optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.