UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21183
                        
                            Issued:2001-12-11
                    
                            Revised:2011-10-03
                    
                            Style
                            21183
                        
                            Multiconductor Cable with extruded Non-integral Jacket
                    
			Rating105 deg C, 600 Vac, Horizontal flame, Cable flame.
		
			Conductor36 AWG min. Solid or Stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketTPE
		
			dia of the cable under jacket is 0-0.700 inches30 mils min average24 mils minimum at any point
		
			0.701-1.000 in45 avg36 min
		
			1.001-1.500 in60 avg48 min
		
			1.501-2.500 in80 avg64 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21183	Issued:2001-12-11
			Revised:2011-10-03


Rating	105 deg C, 600 Vac, Horizontal flame, Cable flame.

Conductor	36 AWG min. Solid or Stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	TPE
	dia of the cable under jacket is 0-0.700 inches	30 mils min average	24 mils minimum at any point
	0.701-1.000 in	45 avg	36 min
	1.001-1.500 in	60 avg	48 min
	1.501-2.500 in	80 avg	64 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External wiring.