UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21185
                        
                            Issued:2002-01-07
                    
                            Revised:2012-04-23
                    
                            Style
                            21185
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor30 AWG - 10 AWG solid or stranded round.
		
			InsulationLabeled or Complying with manufacturers Procedure or Extruded PE or Extruded Foamed PE or Extuded FRPE or Extruded Foamed FRPE
		
			AWG conductor sizeMinimum Average Thickness in milsMinimum Thickness at any point in mils
		
			30-161513
		
			15-102018
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer (polyester tape) and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldInner and outer shield are optional.
		
			CoveringOptional. a textile braid, nylon jacket (2 mils minimum thickness), or minimum 8 mils of semi-rigid or regular PVC may be applied between the conductor assembly and shield.
		
			JacketExtruded PVC, 15 mils min average, 12 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21185	Issued:2002-01-07
			Revised:2012-04-23


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	30 AWG - 10 AWG solid or stranded round.

Insulation	Labeled or Complying with manufacturers Procedure or Extruded PE or Extruded Foamed PE or Extuded FRPE or Extruded Foamed FRPE
	AWG conductor size	Minimum Average Thickness in mils	Minimum Thickness at any point in mils
	30-16	15	13
	15-10	20	18

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer (polyester tape) and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Inner and outer shield are optional.

Covering	Optional. a textile braid, nylon jacket (2 mils minimum thickness), or minimum 8 mils of semi-rigid or regular PVC may be applied between the conductor assembly and shield.

Jacket	Extruded PVC, 15 mils min average, 12 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.