UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21186
                        
                            Issued:2002-01-02
                    
                            Revised:2012-03-27
                    
                            Style
                            21186
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating60, 75, 80 or 90 deg C, 300 Vac, 600 Vac, Cable flame.
		
			Conductor30 AWG - 4/0 AWG.  May include mixed AWG sizes.
		
			InsulationLabeled or complying with Manufacture's AWM Procedure.
		
			AssemblyTwo or more insulated singles twisted together. Lay not specified. Fillers and/or barrier layers optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional. A 6 mil thick or thicker thermoplastic covering may be extruded over conductor assembly.
		
			JacketExtruded FRPE
		
			Diameter of core assembly under jacket (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.700 or less2016
		
			0.701-1.0002722
		
			1.001-1.5004536
		
			1.501-2.5006048
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21186	Issued:2002-01-02
			Revised:2012-03-27


Rating	60, 75, 80 or 90 deg C, 300 Vac, 600 Vac, Cable flame.

Conductor	30 AWG - 4/0 AWG. May include mixed AWG sizes.

Insulation	Labeled or complying with Manufacture's AWM Procedure.

Assembly	Two or more insulated singles twisted together. Lay not specified. Fillers and/or barrier layers optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional. A 6 mil thick or thicker thermoplastic covering may be extruded over conductor assembly.

Jacket	Extruded FRPE
	Diameter of core assembly under jacket (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.700 or less	20	16
	0.701-1.000	27	22
	1.001-1.500	45	36
	1.501-2.500	60	48

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.