UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21195
                        
                            Issued:2002-01-31
                    
                            Revised:2012-01-05
                    
                            Style
                            21195
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket.
                    
			Rating150 deg C, 600 Vac, Cable flame.
		
			Conductor40 AWG minimum.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			FillerFillers - (Optional) Single or mixed fillers consisting of ETFE, PFA, FEP, Foamed PTFE, PTFE, or glass.
		
			Tape(Optional) ETFE, PFA, FEP, Cellular PTFE, PTFE, or glass cloth.
		
			CoveringOptional. 10 mils or heavier extruded PFA or FEP, or 15 mils or heavier extruded ETFE covering may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PFA.
		
			Dia. under jacket in inchesMinimum Average Thickness - MilsMinimum at any point Thickness - Mils
		
			0.350 or less108
		
			0.351 - 0.5001310
		
			0.501 - 0.7001512
		
			0.701 - 1.502016
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21195	Issued:2002-01-31
			Revised:2012-01-05


Rating	150 deg C, 600 Vac, Cable flame.

Conductor	40 AWG minimum.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Filler	Fillers - (Optional) Single or mixed fillers consisting of ETFE, PFA, FEP, Foamed PTFE, PTFE, or glass.

Tape	(Optional) ETFE, PFA, FEP, Cellular PTFE, PTFE, or glass cloth.

Covering	Optional. 10 mils or heavier extruded PFA or FEP, or 15 mils or heavier extruded ETFE covering may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded PFA.
	Dia. under jacket in inches	Minimum Average Thickness - Mils	Minimum at any point Thickness - Mils
	0.350 or less	10	8
	0.351 - 0.500	13	10
	0.501 - 0.700	15	12
	0.701 - 1.50	20	16

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.