UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21196
                        
                            Issued:2002-01-31
                    
                            Revised:2019-11-07
                    
                            Style
                            21196
                        
                            Multiple-Conductor Cable using Non-Integral Jacket.
                    
			Rating150 deg C, 600 Vac, Cable flame.
		
			Conductor40 AWG minimum.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size. Fillers - (Optional) Single or mixed fillers consisting of ETFE, PFA, FEP, Cellular PTFE, PTFE, or glass.
		
			ShieldOptional.
		
			CoveringOptional. 10 mils or heavier PFA or FEP, or 15 mils or heavier ETFE covering may be extruded over the conductor assembly. Tape(Optional, over fillers) ETFE, PFA, FEP, Cellular PTFE, PTFE, or glass cloth.
		
			JacketExtruded FEP
		
			dia. in inches
		
			0.350 or less10 mils min average8 mils minimum at any point
		
			0.351-0.500 dia13 avg10 min
		
			0.501-0.700 dia15 avg12 min
		
			0.701-1.500 dia20 avg16 min
		
			Misc.Fillers	(Optional) Single or mixed fillers consisting of ETFE, PFA, FEP, Cellular PTFE, PTFE, or glass.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21196	Issued:2002-01-31
			Revised:2019-11-07


Rating	150 deg C, 600 Vac, Cable flame.

Conductor	40 AWG minimum.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size. Fillers - (Optional) Single or mixed fillers consisting of ETFE, PFA, FEP, Cellular PTFE, PTFE, or glass.

Shield	Optional.

Covering	Optional. 10 mils or heavier PFA or FEP, or 15 mils or heavier ETFE covering may be extruded over the conductor assembly. Tape(Optional, over fillers) ETFE, PFA, FEP, Cellular PTFE, PTFE, or glass cloth.

Jacket	Extruded FEP
	dia. in inches
	0.350 or less	10 mils min average	8 mils minimum at any point
	0.351-0.500 dia	13 avg	10 min
	0.501-0.700 dia	15 avg	12 min
	0.701-1.500 dia	20 avg	16 min

Misc.	Fillers (Optional) Single or mixed fillers consisting of ETFE, PFA, FEP, Cellular PTFE, PTFE, or glass.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.