UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21197
                        
                            Issued:2002-01-31
                    
                            Revised:2011-10-06
                    
                            Style
                            21197
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating150 deg C, 600 Vac, Cable flame.
		
			Conductor40 AWG minimum.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			FillersOptional.  Single or mixed fillers consisting of ETFE, PFA, FEP, Cellular PTFE, PTFE, or glass.
		
			TapeOptional.  ETFE, PFA, FEP, Cellular PTFE, PTFE, or glass cloth.
		
			CoveringOptional.  10 mils or heavier PFA or FEP, or 15 mils or heavier ETFE covering may be extruded over the conductor assembly. Tape (Optional, over fillers) ETFE, PFA, FEP, Cellular PTFE, PTFE, or glass cloth.
		
			ShieldOptional.
		
			JacketExtruded ETFE
		
			Diameter under jacket in inchesMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less15 mils12 mils
		
			0.701 - 1.500 inch20 mils16 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21197	Issued:2002-01-31
			Revised:2011-10-06


Rating	150 deg C, 600 Vac, Cable flame.

Conductor	40 AWG minimum.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Fillers	Optional. Single or mixed fillers consisting of ETFE, PFA, FEP, Cellular PTFE, PTFE, or glass.

Tape	Optional. ETFE, PFA, FEP, Cellular PTFE, PTFE, or glass cloth.

Covering	Optional. 10 mils or heavier PFA or FEP, or 15 mils or heavier ETFE covering may be extruded over the conductor assembly. Tape (Optional, over fillers) ETFE, PFA, FEP, Cellular PTFE, PTFE, or glass cloth.

Shield	Optional.

Jacket	Extruded ETFE
	Diameter under jacket in inches	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	15 mils	12 mils
	0.701 - 1.500 inch	20 mils	16 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.