UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21209
                        
                            Issued:2002-03-27
                    
                            Revised:2012-04-25
                    
                            Style
                            21209
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating90 deg C, 125 Vac, 150 Vac, 300 Vac, 600 Vac or 1000 Vac, Cable flame.
		
			Conductor40 AWG min. solid or stranded round.
		
			InsulationLabeled or complies with manufacturer's Singles	AWM Procedure rated 90 deg C min and a voltage rating equaling or exceeding the rating of the cable.
		
			AssemblyTwo or more singles or groups of twisted singles twisted together. Lay not specified. Barrier layer, shield, braid and/or fillers optional.
		
			JacketExtruded TPU -
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			2.501-4.500 inch110 mils88 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or external wiring. 		
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21209	Issued:2002-03-27
			Revised:2012-04-25


Rating	90 deg C, 125 Vac, 150 Vac, 300 Vac, 600 Vac or 1000 Vac, Cable flame.

Conductor	40 AWG min. solid or stranded round.

Insulation	Labeled or complies with manufacturer's Singles AWM Procedure rated 90 deg C min and a voltage rating equaling or exceeding the rating of the cable.

Assembly	Two or more singles or groups of twisted singles twisted together. Lay not specified. Barrier layer, shield, braid and/or fillers optional.

Jacket	Extruded TPU -
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	2.501-4.500 inch	110 mils	88 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or external wiring.