UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21213
                        
                            Issued:2002-04-26
                    
                            Revised:2011-10-14
                    
                            Style
                            21213
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket.
                    
			Rating80 deg C, 30 Vac, Cable flame.
		
			Conductor50 AWG min. solid or stranded round.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketTPU/PVC Blend
		
			Diameter of Cable under Jacket in inchMinimum  Average thickness in milsMinimum thickness at any point in mils
		
			0.700 or less3024
		
			0.701-1.0006048
		
			1.001-1.50180 avg64 min
		
			; #- Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnect or internal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21213	Issued:2002-04-26
			Revised:2011-10-14


Rating	80 deg C, 30 Vac, Cable flame.

Conductor	50 AWG min. solid or stranded round.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Shield	Optional.

Jacket	TPU/PVC Blend
	Diameter of Cable under Jacket in inch	Minimum Average thickness in mils	Minimum thickness at any point in mils
	0.700 or less	30	24
	0.701-1.000	60	48
	1.001-1.501	80 avg	64 min
	; #- Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnect or internal wiring of electronic equipment.