UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21214
                        
                            Issued:2002-04-26
                    
                            Revised:2012-04-18
                    
                            Style
                            21214
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 300 Vac, Cable flame.
		
			Insulated ConductorLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. Extruded PVC, over the conductor assembly, 6 mils minimum thickness at any point.
		
			JacketExtruded PVC/TPU.
		
			Dia. of cable under jacket@Minimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch60 mils48 mils
		
			1.001-1.501 inch80 mils64 mils
		
			@ - Major diameter if cable is flat or oval.
		
			BraidOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal wiring or internal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21214	Issued:2002-04-26
			Revised:2012-04-18


Rating	80 deg C, 300 Vac, Cable flame.

Insulated Conductor	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. Extruded PVC, over the conductor assembly, 6 mils minimum thickness at any point.

Jacket	Extruded PVC/TPU.
	Dia. of cable under jacket@	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	60 mils	48 mils
	1.001-1.501 inch	80 mils	64 mils
	@ - Major diameter if cable is flat or oval.

Braid	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External wiring or internal wiring.