UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21216
                        
                            Issued:2002-04-02
                    
                            Revised:2012-04-24
                    
                            Style
                            21216
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating90 deg C, 600 Vac, Cable flame, Oil Resistant 60 deg C.
		
			ConductorNo. 40 AWG min.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch60 mils48 mils
		
			1.001-1.500 inch80 mils64 mils
		
			1.501-2.500 inch110 mils88 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment where exposed oil with a temperature not exceeding 60ºC .
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21216	Issued:2002-04-02
			Revised:2012-04-24


Rating	90 deg C, 600 Vac, Cable flame, Oil Resistant 60 deg C.

Conductor	No. 40 AWG min.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	60 mils	48 mils
	1.001-1.500 inch	80 mils	64 mils
	1.501-2.500 inch	110 mils	88 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment where exposed oil with a temperature not exceeding 60ºC .