UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21217
                        
                            Issued:2002-04-25
                    
                            Revised:2019-11-07
                    
                            Style
                            21217
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating75 deg C, 600 Vac, Horizontal flame.
		
			Conductor30 AWG - 4/0 AWG solid or stranded round, tinned or bare copper. May include mixed AWG sizes.
		
			InsulationLabeded or complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo or more insulated singles twisted together. Lay not specified. Fillers and/or barrier layers optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional. A 6 mil, or heavier, Extruded FRPE covering may be extruded over conductor assembly.
		
			JacketExtruded FRPE
		
			major dia. in inches
		
			0.700 or less30 mils min average24 mils minimum at any point
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.501 dia60 avg48 min
		
			1.501 dia and larger80 avg64 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21217	Issued:2002-04-25
			Revised:2019-11-07


Rating	75 deg C, 600 Vac, Horizontal flame.

Conductor	30 AWG - 4/0 AWG solid or stranded round, tinned or bare copper. May include mixed AWG sizes.

Insulation	Labeded or complying with Manufacturer's AWM Procedure.

Assembly	Two or more insulated singles twisted together. Lay not specified. Fillers and/or barrier layers optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional. A 6 mil, or heavier, Extruded FRPE covering may be extruded over conductor assembly.

Jacket	Extruded FRPE
	major dia. in inches
	0.700 or less	30 mils min average	24 mils minimum at any point
	0.701-1.000 dia	45 avg	36 min
	1.001-1.501 dia	60 avg	48 min
	1.501 dia and larger	80 avg	64 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances.