UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21218
                        
                            Issued:2002-05-30
                    
                            Revised:2017-12-15
                    
                            Style
                            21218
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 300, 600, 1000 Vac, Cable flame.
		
			Conductor40 AWG min. solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyConsists of one or more conductors or groups of conductors twisted together. The conductors or groups of conductors may be laid to form anoval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.
		
			BraidOptional. Copper tinned or bare, with minimum coverage of percent.
		
			JacketTPE
		
			Dia of cable under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 in or less30 mils24 mils
		
			0.701-1.000 in45 mils36 mils
		
			1.010-1.500 in60 mils48 mils
		
			1.501-2.500 in80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21218	Issued:2002-05-30
			Revised:2017-12-15


Rating	80 deg C, 300, 600, 1000 Vac, Cable flame.

Conductor	40 AWG min. solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Consists of one or more conductors or groups of conductors twisted together. The conductors or groups of conductors may be laid to form anoval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Braid	Optional. Copper tinned or bare, with minimum coverage of percent.

Jacket	TPE
	Dia of cable under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 in or less	30 mils	24 mils
	0.701-1.000 in	45 mils	36 mils
	1.010-1.500 in	60 mils	48 mils
	1.501-2.500 in	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment.