UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21221
                        
                            Issued:2002-05-31
                    
                            Revised:2011-09-19
                    
                            Style
                            21221
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating105 deg C, 600 Vac, FT2 flame.
		
			Conductor10 AWG, copper, stranded per UL 62 for Type ST cord.
		
			InsulationExtruded PVC (minimum 2500 psi, unaged), 20 mils minimum average thickness, 18 mils minimum thickness at any point.
		
			AssemblyConsists of five conductors laid parallel. The green grounding conductor is in the center. The overall jacket applied over the parallel, insulated conductors in such a manner that a web, min 45 mils thick is formed which separates the grounding conductor from the circuit conductors on both sides of it, forming a flat cable.
		
			JacketExtruded Nylon - 4 mils minimum thickness over the PVC insulation.
		
			JacketExtruded TPE (minimum 1700 psi, unaged), 75 mils minimum average thickness, 60 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseIn the manufacture of Special Use Cord Sets where extra-hard-usage cord is required and where the acceptability of the combination is determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21221	Issued:2002-05-31
			Revised:2011-09-19


Rating	105 deg C, 600 Vac, FT2 flame.

Conductor	10 AWG, copper, stranded per UL 62 for Type ST cord.

Insulation	Extruded PVC (minimum 2500 psi, unaged), 20 mils minimum average thickness, 18 mils minimum thickness at any point.

Assembly	Consists of five conductors laid parallel. The green grounding conductor is in the center. The overall jacket applied over the parallel, insulated conductors in such a manner that a web, min 45 mils thick is formed which separates the grounding conductor from the circuit conductors on both sides of it, forming a flat cable.

Jacket	Extruded Nylon - 4 mils minimum thickness over the PVC insulation.

Jacket	Extruded TPE (minimum 1700 psi, unaged), 75 mils minimum average thickness, 60 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	In the manufacture of Special Use Cord Sets where extra-hard-usage cord is required and where the acceptability of the combination is determined by Underwriters Laboratories Inc.