UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21222
                        
                            Issued:2002-05-29
                    
                            Revised:2011-10-11
                    
                            Style
                            21222
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating75, 80, 90 or 105 deg C, 300 Vac, Cable flame.
		
			Conductor40 AWG minimum, solid or stranded.
		
			Insulationlabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more conductors or groups of conductors laid parallel or twisted forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.
		
			CoveringOptional. Extruded PVC, 6 mils or heavier.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.501 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			- Major Diameter if cable is flat or oval
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21222	Issued:2002-05-29
			Revised:2011-10-11


Rating	75, 80, 90 or 105 deg C, 300 Vac, Cable flame.

Conductor	40 AWG minimum, solid or stranded.

Insulation	labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more conductors or groups of conductors laid parallel or twisted forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.

Covering	Optional. Extruded PVC, 6 mils or heavier.

Shield	Optional.

Jacket	Extruded PVC.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.501 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	- Major Diameter if cable is flat or oval

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring.