UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21227
                        
                            Issued:2002-07-15
                    
                            Revised:2011-10-13
                    
                            Style
                            21227
                        
                            Parallel cable with extruded insulation.
                    
			Rating90 deg C, 150 Vac, Horizontal flame.
		
			Conductor36 AWG - 26 AWG solid or stranded round.
		
			InsulationExtruded TPE, 4 mils minimum average thickness, 3 mils minimum thickness at any point.
		
			AssemblyTwo to 150 insulated singles or twisted pair or triads laid parallel in one plane, retained by heat or film melt bonded section at random intervals up to two to 100 in. apart, or along the complete length of cable, with or without PVC bands on one side of the cables in between the heat or film melt bonded sections.  Width of heat or film melt bonded sections minimum 1 inch. Polyester laminated film may be heat bonded on one or both sides of cable.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring where not subjected to mechanical abuse.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21227	Issued:2002-07-15
			Revised:2011-10-13


Rating	90 deg C, 150 Vac, Horizontal flame.

Conductor	36 AWG - 26 AWG solid or stranded round.

Insulation	Extruded TPE, 4 mils minimum average thickness, 3 mils minimum thickness at any point.

Assembly	Two to 150 insulated singles or twisted pair or triads laid parallel in one plane, retained by heat or film melt bonded section at random intervals up to two to 100 in. apart, or along the complete length of cable, with or without PVC bands on one side of the cables in between the heat or film melt bonded sections. Width of heat or film melt bonded sections minimum 1 inch. Polyester laminated film may be heat bonded on one or both sides of cable.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring where not subjected to mechanical abuse.