UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21237
                        
                            Issued:2003-01-04
                    
                            Revised:2017-05-04
                    
                            Style
                            21237
                        
                            Multiple-Conductor Cable with Extruded Non-Integral Jacket
                    
			Rating105 deg C, 600 Vac, Cable flame, Optional - 60 deg C Oil, 75 deg C wet
		
			Conductor40 AWG minimum solid or stranded
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure. R/C QMTT2 insulation material rated for 75 C water resistance for wet location
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional
		
			CoveringOptional - Extruded TPE,SRPVC, PVC, FEP, PFA, EP or Nylon; 6 mils minimum thickness at any point
		
			JacketExtruded TPE
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch60 mils48 mils
		
			1.001-1.500 inch80 mils64 mils
		
			1.501-2.500 inch110 mils88 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral
		
			UseExternal interconnection or internal wiring of electronic equipment or appliances
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21237	Issued:2003-01-04
			Revised:2017-05-04


Rating	105 deg C, 600 Vac, Cable flame, Optional - 60 deg C Oil, 75 deg C wet

Conductor	40 AWG minimum solid or stranded

Insulation	Labeled or complying with Manufacturer's AWM Procedure. R/C QMTT2 insulation material rated for 75 C water resistance for wet location

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional

Covering	Optional - Extruded TPE,SRPVC, PVC, FEP, PFA, EP or Nylon; 6 mils minimum thickness at any point

Jacket	Extruded TPE
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	60 mils	48 mils
	1.001-1.500 inch	80 mils	64 mils
	1.501-2.500 inch	110 mils	88 mils

Standard	Appliance Wiring Material UL 758.

Marking	General

Use	External interconnection or internal wiring of electronic equipment or appliances