UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21238
                        
                            Issued:2003-01-04
                    
                            Revised:2012-04-24
                    
                            Style
                            21238
                        
                            Multiple conductor cable using non-integral jacket
                    
			Rating80 deg C, 600 Vac, Horizontal flame.
		
			Insulated singlesNo. 32 AWG minimum. Labeled or complying with Manufacturer's AWM Procedure having a minimum rating of 80 deg C, 600 V.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional. A 6 mil or heavier covering may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketPUR.
		
			Dia. of round assembly under jacket in inchesMinimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.350 or less1512
		
			0.351 - 0.7003024
		
			0.701 - 1.0004536
		
			1.001 - 1.5006048
		
			# Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment and appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21238	Issued:2003-01-04
			Revised:2012-04-24


Rating	80 deg C, 600 Vac, Horizontal flame.

Insulated singles	No. 32 AWG minimum. Labeled or complying with Manufacturer's AWM Procedure having a minimum rating of 80 deg C, 600 V.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional. A 6 mil or heavier covering may be extruded over the conductor assembly.

Shield	Optional.

Jacket	PUR.
	Dia. of round assembly under jacket in inches	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.350 or less	15	12
	0.351 - 0.700	30	24
	0.701 - 1.000	45	36
	1.001 - 1.500	60	48
	# Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment and appliances.