UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21239
                        
                            Issued:2003-01-21
                    
                            Revised:2019-11-07
                    
                            Style
                            21239
                        
                            Muliconductor Cable with Extruded Non-Integral Jacket.
                    
			Rating200 deg C, 150 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo insulated singles laid parallel, two to 40 of insulated singles twisted together, or one to 20 twisted pairs twisted together to form a round core assembly. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional, tinned or untinned copper wire braided.
		
			JacketFEP
		
			dia. in inches
		
			0.250 or less12 mils min average10 mils minimum at any point
		
			0.251-0.350 dia14 avg11 min
		
			0.351-0.500 dia16 avg12 min
		
			0.501-0.700 dia18 avg14 min
		
			0.701-1.500 dia24 avg19 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring or External Interconnection of Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21239	Issued:2003-01-21
			Revised:2019-11-07


Rating	200 deg C, 150 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two insulated singles laid parallel, two to 40 of insulated singles twisted together, or one to 20 twisted pairs twisted together to form a round core assembly. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional, tinned or untinned copper wire braided.

Jacket	FEP
	dia. in inches
	0.250 or less	12 mils min average	10 mils minimum at any point
	0.251-0.350 dia	14 avg	11 min
	0.351-0.500 dia	16 avg	12 min
	0.501-0.700 dia	18 avg	14 min
	0.701-1.500 dia	24 avg	19 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring or External Interconnection of Electronic Equipment.