UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21240
                        
                            Issued:2003-01-21
                    
                            Revised:2012-04-19
                    
                            Style
                            21240
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating250 deg C, 150 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo insulated singles laid parallel, two to 40 of insulated singles twisted together, or one to 20 twisted pairs twisted together to form a round core assembly. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional, tinned or untinned copper wire braided.
		
			JacketExtruded PFA.
		
			Dia. of cable under jacketMinimum average thicknessMinimum thickness at any point
		
			0.250 inch or less8 mils6 mils
		
			0.251-0.350 inch10 mils8 mils
		
			0.351-0.500 inch13 mils10 mils
		
			0.501-0.700 inch15 mils12 mils
		
			0.701-1.500 inch20 mils16 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring or External Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21240	Issued:2003-01-21
			Revised:2012-04-19


Rating	250 deg C, 150 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two insulated singles laid parallel, two to 40 of insulated singles twisted together, or one to 20 twisted pairs twisted together to form a round core assembly. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional, tinned or untinned copper wire braided.

Jacket	Extruded PFA.
	Dia. of cable under jacket	Minimum average thickness	Minimum thickness at any point
	0.250 inch or less	8 mils	6 mils
	0.251-0.350 inch	10 mils	8 mils
	0.351-0.500 inch	13 mils	10 mils
	0.501-0.700 inch	15 mils	12 mils
	0.701-1.500 inch	20 mils	16 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring or External Wiring.