UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21243
                        
                            Issued:2003-01-22
                    
                            Revised:2019-11-07
                    
                            Style
                            21243
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating200 deg C, 300 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure. Designations of all styles of individual conductors used in making up the cable assembly shall be available.
		
			AssemblyTwo or more individually insulated conductors or coaxial members, or groups of insulated conductors cabled together to form a round cable. Glass fiber fillers may be used in a cable but are not required. A barrier layer, if employed, may be a PTFE or equivalent tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly or individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketExtruded PFA
		
			dia. in inches
		
			0.250 or less8 mils min average6 mils min at any point
		
			0.251-0.350 dia10 avg8 min
		
			0.351-0.500 dia13 avg10 min
		
			0.501-0.700 dia15 avg12 min
		
			0.701-1.500 dia20 avg16 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring or External Interconnection of Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21243	Issued:2003-01-22
			Revised:2019-11-07


Rating	200 deg C, 300 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure. Designations of all styles of individual conductors used in making up the cable assembly shall be available.

Assembly	Two or more individually insulated conductors or coaxial members, or groups of insulated conductors cabled together to form a round cable. Glass fiber fillers may be used in a cable but are not required. A barrier layer, if employed, may be a PTFE or equivalent tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly or individual conductors or groups of conductors.

Shield	Optional.

Jacket	Extruded PFA
	dia. in inches
	0.250 or less	8 mils min average	6 mils min at any point
	0.251-0.350 dia	10 avg	8 min
	0.351-0.500 dia	13 avg	10 min
	0.501-0.700 dia	15 avg	12 min
	0.701-1.500 dia	20 avg	16 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring or External Interconnection of Electronic Equipment.