UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21246
                        
                            Issued:2003-01-31
                    
                            Revised:2019-11-07
                    
                            Style
                            21246
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket.
                    
			Rating150 deg C, 600 Vac, Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketExtruded ETFE
		
			dia. in inches
		
			0.425 or less15 mils min average12 mils minimum at any point
		
			0.426-0.700 dia30 avg26 min
		
			0.701-1.500 dia45 avg40 min
		
			1.501-2.500 dia60 avg55 min
		
			2.501 dia and larger90 avg82 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21246	Issued:2003-01-31
			Revised:2019-11-07


Rating	150 deg C, 600 Vac, Horizontal flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	Extruded ETFE
	dia. in inches
	0.425 or less	15 mils min average	12 mils minimum at any point
	0.426-0.700 dia	30 avg	26 min
	0.701-1.500 dia	45 avg	40 min
	1.501-2.500 dia	60 avg	55 min
	2.501 dia and larger	90 avg	82 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.