UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21248
                        
                            Issued:2003-02-06
                    
                            Revised:2012-01-17
                    
                            Style
                            21248
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating150 deg C, 600 Vac, Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketExtruded ECTFE
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.425 inch or less15 mils13 mils
		
			0.426 - 0.700 inch30 mils26 mils
		
			0.701 - 1.500 inch45 mils40 mils
		
			1.501 - 2.500 inch60 mils55 mils
		
			2.501 and larger90 mils82 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21248	Issued:2003-02-06
			Revised:2012-01-17


Rating	150 deg C, 600 Vac, Horizontal flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	Extruded ECTFE
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.425 inch or less	15 mils	13 mils
	0.426 - 0.700 inch	30 mils	26 mils
	0.701 - 1.500 inch	45 mils	40 mils
	1.501 - 2.500 inch	60 mils	55 mils
	2.501 and larger	90 mils	82 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.