UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21253
                        
                            Issued:2003-02-28
                    
                            Revised:2011-09-26
                    
                            Style
                            21253
                        
                            Multiconductor Cable With Extruded Non-Integral Jacket
                    
			Rating75 deg C, 30 Vac, Cable flame.
		
			Conductor40 AWG minimum.
		
			InsulationLabeled or complies with manufacturer's Procedure.
		
			AssemblyTwo or more singles or groups of twisted singles twisted together or groups may be laid parallel to form flat, oval, or round cables. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional. Extruded PVC, 4 mils minimum thickness at any point.
		
			JacketExtruded TPU
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inches or less30 mils24 mils
		
			0.701-1.000 inches45 mils36 mils
		
			1.001-1.500 inches60 mils48 mils
		
			1.501-2.500 inches80 mils64 mils
		
			2.501-4.000 inches110 mils88 mils
		
			4.001 inches and larger140 mils112 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21253	Issued:2003-02-28
			Revised:2011-09-26


Rating	75 deg C, 30 Vac, Cable flame.

Conductor	40 AWG minimum.

Insulation	Labeled or complies with manufacturer's Procedure.

Assembly	Two or more singles or groups of twisted singles twisted together or groups may be laid parallel to form flat, oval, or round cables. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional. Extruded PVC, 4 mils minimum thickness at any point.

Jacket	Extruded TPU
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inches or less	30 mils	24 mils
	0.701-1.000 inches	45 mils	36 mils
	1.001-1.500 inches	60 mils	48 mils
	1.501-2.500 inches	80 mils	64 mils
	2.501-4.000 inches	110 mils	88 mils
	4.001 inches and larger	140 mils	112 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment.