UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21262
                        
                            Issued:2003-04-25
                    
                            Revised:2012-03-30
                    
                            Style
                            21262
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating90 deg C, 600 Vac, FT2 flame.
		
			ConductorSolid or stranded round, tinned or bare.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			ShieldOptional - 1 mils minimum thickness or thicker PETP foil covering may be applied over the conductor assembly.
		
			CoveringOptional- 4 mils minimum thickness or thicker wall of EPDM may be extruded over the conductor assembly or groups of conductors.
		
			JacketExtruded EVA Rubber
		
			Diameter of core assembly under jacket (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.750 or less5544
		
			0.751-1.00011088
		
			1.001-1.250125100
		
			1.251-1.500140112
		
			1.501-1.750160128
		
			1.751-2.000180144
		
			2.001-2.250200160
		
			2.251-2.500220176
		
			2.501-2.750240192
		
			2.751-3.00260208
		
			3.001-3.250280224
		
			3.251-3.500295236
		
			3.501-3.950310248
		
			3.951-4.450330264
		
			4.451-5.000345276
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21262	Issued:2003-04-25
			Revised:2012-03-30


Rating	90 deg C, 600 Vac, FT2 flame.

Conductor	Solid or stranded round, tinned or bare.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Shield	Optional - 1 mils minimum thickness or thicker PETP foil covering may be applied over the conductor assembly.

Covering	Optional- 4 mils minimum thickness or thicker wall of EPDM may be extruded over the conductor assembly or groups of conductors.

Jacket	Extruded EVA Rubber
	Diameter of core assembly under jacket (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.750 or less	55	44
	0.751-1.000	110	88
	1.001-1.250	125	100
	1.251-1.500	140	112
	1.501-1.750	160	128
	1.751-2.000	180	144
	2.001-2.250	200	160
	2.251-2.500	220	176
	2.501-2.750	240	192
	2.751-3.00	260	208
	3.001-3.250	280	224
	3.251-3.500	295	236
	3.501-3.950	310	248
	3.951-4.450	330	264
	4.451-5.000	345	276

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.