UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21265
                        
                            Issued:2003-05-13
                    
                            Revised:2019-11-07
                    
                            Style
                            21265
                        
                            Multiconductor Cable with Extruded Non-integral Jacket.
                    
			Rating80 deg C, 300 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated wires or group of individually insulated wires cabled together. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethyelene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups or conductors. May be formed in a round or flat assembly.
		
			ShieldOptional.
		
			JacketFRPE
		
			major dia. in inches
		
			0.700 or less30 mils min average24 mils minimum at any point
		
			0.701-1.000 dia45 avg36 min
		
			1.010-1.500 dia60 avg48 min
		
			1.501-2.500 dia80 avg64 min
		
			- Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or External Wiring of Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21265	Issued:2003-05-13
			Revised:2019-11-07


Rating	80 deg C, 300 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated wires or group of individually insulated wires cabled together. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethyelene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups or conductors. May be formed in a round or flat assembly.

Shield	Optional.

Jacket	FRPE
	major dia. in inches
	0.700 or less	30 mils min average	24 mils minimum at any point
	0.701-1.000 dia	45 avg	36 min
	1.010-1.500 dia	60 avg	48 min
	1.501-2.500 dia	80 avg	64 min

	- Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or External Wiring of Electronic Equipment.