UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21271
                        
                            Issued:2003-06-24
                    
                            Revised:2011-11-15
                    
                            Style
                            21271
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket.
                    
			Rating80 deg C, 30 Vac, Cable flame.
		
			Conductor40 AWG min. solid or stranded.
		
			InsulationLabeled or complying with Manufacturer¿s AWM Procedure having a minimum rating of 80 deg C, 30 Vac.
		
			AssemblyConsists of two or more conductors or groups of Conductors twisted together. The conductors or groups of conductors may be laid to form an oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.
		
			JacketExtruded TPE, thickness in accordance with the table below.
		
			Cable diameter (In.)Min. average Thickness (Mils)Min. thickness at any point (Mils)
		
			0.00 - 0.4002420
		
			0.401 - 0.7003024
		
			0.701 - 1.5004536
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21271	Issued:2003-06-24
			Revised:2011-11-15


Rating	80 deg C, 30 Vac, Cable flame.

Conductor	40 AWG min. solid or stranded.

Insulation	Labeled or complying with Manufacturer¿s AWM Procedure having a minimum rating of 80 deg C, 30 Vac.

Assembly	Consists of two or more conductors or groups of Conductors twisted together. The conductors or groups of conductors may be laid to form an oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Jacket	Extruded TPE, thickness in accordance with the table below.
	Cable diameter (In.)	Min. average Thickness (Mils)	Min. thickness at any point (Mils)
	0.00 - 0.400	24	20
	0.401 - 0.700	30	24
	0.701 - 1.500	45	36

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment.