UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21272
                        
                            Issued:2003-08-13
                    
                            Revised:2019-11-07
                    
                            Style
                            21272
                        
                            Multiple-Conductor Cable using Non-Integral Jacket.
                    
			Rating80 deg C, 90 Vac, Cable flame.
		
			InsulationLabeled or complies with this Manufacturer's AWM Procedure.
		
			AssemblyTwo or more insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly, with optional inner covering, optional inner shield, optional outer covering, optional outer shield and overall jacket. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldInner and outer shield are optional.
		
			CoveringInner and outer covering are optional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded FRPE
		
			mjor dia. in inches
		
			0.700 or less30 mils min average24 mils minimum at any point
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			1.501-2.500 dia80 avg64 min
		
			2.501-4.000 dia110 avg88 min
		
			4.001 dia and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring and external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21272	Issued:2003-08-13
			Revised:2019-11-07


Rating	80 deg C, 90 Vac, Cable flame.

Insulation	Labeled or complies with this Manufacturer's AWM Procedure.

Assembly	Two or more insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly, with optional inner covering, optional inner shield, optional outer covering, optional outer shield and overall jacket. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Inner and outer shield are optional.

Covering	Inner and outer covering are optional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded FRPE
	mjor dia. in inches
	0.700 or less	30 mils min average	24 mils minimum at any point
	0.701-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min
	1.501-2.500 dia	80 avg	64 min
	2.501-4.000 dia	110 avg	88 min
	4.001 dia and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring and external interconnection of electronic equipment.