UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21274
                        
                            Issued:2003-08-22
                    
                            Revised:2011-09-19
                    
                            Style
                            21274
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 600 Vac, Horizontal flame.
		
			Conductor36 AWG minimum. Solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded TPU
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less45 mils36 mils
		
			0.701-1.000 mils60 mils48 mils
		
			1.001-1.500 inch80 mils64 mils
		
			1.501-2.500 inch110 mils88 mils
		
			2.500 inch and larger140 mils112 mils
		
			BraidOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21274	Issued:2003-08-22
			Revised:2011-09-19


Rating	80 deg C, 600 Vac, Horizontal flame.

Conductor	36 AWG minimum. Solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Covering	Optional.

Shield	Optional.

Jacket	Extruded TPU
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	45 mils	36 mils
	0.701-1.000 mils	60 mils	48 mils
	1.001-1.500 inch	80 mils	64 mils
	1.501-2.500 inch	110 mils	88 mils
	2.500 inch and larger	140 mils	112 mils

Braid	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.