UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21275
                        
                            Issued:2003-08-22
                    
                            Revised:2012-03-27
                    
                            Style
                            21275
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating105 deg C, 300 Vac, Horizontal flame, Optional - 60 deg C Wet.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyCable consists of an overall jacket, two or more 18 AWG to 10 AWG conductors and an optional member consisting of an optional TPE, an aluminum mylar with optional drain wire in contact with the metal portion of the tape or polyester tape cabled around two or more 24-16 AWG insulated conductors, an optional fiber optic conductor.  Braid may be optionally applied over conductors and/or assemblies.
		
			SeparatorOptional. Paper 2 mils thick maximum may be employed under the overall jacket.
		
			FillerOptional. Kevlar, Jute or Polypropylene fillers may be employed in the interstices to make the cable round.
		
			ShieldOptional.
		
			JacketExtruded TPE
		
			Dia. under jacket in inchesMinimum average thickness milsMinimum thickness at any point mils
		
			1.000 or less4540
		
			1.001-1.6006048
		
			1.601-2.5008064
		
			2.501-4.00011088
		
			4.001 and larger140112
		
			Misc.Separator - Paper with 2 mils thick maximum may be employed under the overall jacket. Fillers - Kevlar, Jute or Polypropylene fillers may be employed in the interstices to make the cable round.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSpecial use outdoor power supply cord; 105 deg C dry and 60 deg C wet where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21275	Issued:2003-08-22
			Revised:2012-03-27


Rating	105 deg C, 300 Vac, Horizontal flame, Optional - 60 deg C Wet.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Cable consists of an overall jacket, two or more 18 AWG to 10 AWG conductors and an optional member consisting of an optional TPE, an aluminum mylar with optional drain wire in contact with the metal portion of the tape or polyester tape cabled around two or more 24-16 AWG insulated conductors, an optional fiber optic conductor. Braid may be optionally applied over conductors and/or assemblies.

Separator	Optional. Paper 2 mils thick maximum may be employed under the overall jacket.

Filler	Optional. Kevlar, Jute or Polypropylene fillers may be employed in the interstices to make the cable round.

Shield	Optional.

Jacket	Extruded TPE
	Dia. under jacket in inches	Minimum average thickness mils	Minimum thickness at any point mils
	1.000 or less	45	40
	1.001-1.600	60	48
	1.601-2.500	80	64
	2.501-4.000	110	88
	4.001 and larger	140	112

Misc.	Separator - Paper with 2 mils thick maximum may be employed under the overall jacket. Fillers - Kevlar, Jute or Polypropylene fillers may be employed in the interstices to make the cable round.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Special use outdoor power supply cord; 105 deg C dry and 60 deg C wet where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.