UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21276
                        
                            Issued:2003-03-09
                    
                            Revised:2011-10-20
                    
                            Style
                            21276
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating90 deg C, 1000 Vac, Cable flame.
		
			Conductor40 AWG - 2000 kcmil, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of Assembly insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic tape wrap. The barrier layer may be applied over the twisted assembly of individual conductors, groups of conductors or individual conductors.
		
			ShieldOptional.
		
			JacketExtruded TPU
		
			dia. in inches of .700 or less45 mils min average36 mils minimum at any point
		
			0.701-1.000 dia60 avg48 min
		
			1.001-1.500 dia80 avg64 min
		
			1.501-2.500 dia110 avg88 min
		
			2.500 dia and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21276	Issued:2003-03-09
			Revised:2011-10-20


Rating	90 deg C, 1000 Vac, Cable flame.

Conductor	40 AWG - 2000 kcmil, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of Assembly insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic tape wrap. The barrier layer may be applied over the twisted assembly of individual conductors, groups of conductors or individual conductors.

Shield	Optional.

Jacket	Extruded TPU
	dia. in inches of .700 or less	45 mils min average	36 mils minimum at any point
	0.701-1.000 dia	60 avg	48 min
	1.001-1.500 dia	80 avg	64 min
	1.501-2.500 dia	110 avg	88 min
	2.500 dia and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.