UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21277
                        
                            Issued:2003-09-04
                    
                            Revised:2011-11-28
                    
                            Style
                            21277
                        
                            Single-conductor cable with extruded non-integral covering.
                    
			Rating150 deg C, 300 Vac, Horizontal flame (construction A only).
		
			Conductor36 AWG - 20 AWG, solid or stranded.
		
			InsulationExtruded ETFE, 9 mils minimum average thickness, 8 mils minimum thickness at any point.
		
			AssemblyTwo to six individually insulated conductors or groups of conductors cabled together into a round. cable. Lay not specified.
		
			ShieldBraid (85 percent min coverage) over the individual or groups of conductors.
		
			CoveringConstruction A: Extruded XLFRPE, 9 mils minimum average thickness, 7 mils minimum thickness at any point. Construction B: Extruded XLPE, 9 mils minimum average thickness, 7 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseCONSTRUCTION A: Internal Wiring, High Resistance Heater Wire. CONSTRUCTION B: For Further Processing, High Resistance Heater Wire.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21277	Issued:2003-09-04
			Revised:2011-11-28


Rating	150 deg C, 300 Vac, Horizontal flame (construction A only).

Conductor	36 AWG - 20 AWG, solid or stranded.

Insulation	Extruded ETFE, 9 mils minimum average thickness, 8 mils minimum thickness at any point.

Assembly	Two to six individually insulated conductors or groups of conductors cabled together into a round. cable. Lay not specified.

Shield	Braid (85 percent min coverage) over the individual or groups of conductors.

Covering	Construction A: Extruded XLFRPE, 9 mils minimum average thickness, 7 mils minimum thickness at any point. Construction B: Extruded XLPE, 9 mils minimum average thickness, 7 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	CONSTRUCTION A: Internal Wiring, High Resistance Heater Wire. CONSTRUCTION B: For Further Processing, High Resistance Heater Wire.