UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21283
                        
                            Issued:2003-09-05
                    
                            Revised:2011-09-07
                    
                            Style
                            21283
                        
                            Multiconductor Cable with Extruded non-integral jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG min. solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturers shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional. Over one or more of the insulated conductors or between the conductor assembly and the optional covering.
		
			CoveringOptional. Extruded FRPE or extruded PVC covering over the conductor assembly, 5 mils minimum thickness at any point.
		
			JacketExtruded FRPE, 12 mils min average thickness, 10 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electrical equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21283	Issued:2003-09-05
			Revised:2011-09-07


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG min. solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturers shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional. Over one or more of the insulated conductors or between the conductor assembly and the optional covering.

Covering	Optional. Extruded FRPE or extruded PVC covering over the conductor assembly, 5 mils minimum thickness at any point.

Jacket	Extruded FRPE, 12 mils min average thickness, 10 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electrical equipment.