UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21284
                        
                            Issued:2003-09-05
                    
                            Revised:2019-11-07
                    
                            Style
                            21284
                        
                            Multiple conductor cable using non-integral jacket.
                    
			Rating80 deg C, 30 Vac, Cable flame.
		
			Conductor40 AWG min. solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturers shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional. Over one or more of the insulated conductors or between the conductor assembly and the optional covering.
		
			CoveringOptional. A 5 mil or heavier FRPE or PVC covering over the conductor assembly.
		
			JacketFRPE
		
			dia. in inches
		
			0.700 or less30 mils min average24 mils minimum at any point
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21284	Issued:2003-09-05
			Revised:2019-11-07


Rating	80 deg C, 30 Vac, Cable flame.

Conductor	40 AWG min. solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturers shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional. Over one or more of the insulated conductors or between the conductor assembly and the optional covering.

Covering	Optional. A 5 mil or heavier FRPE or PVC covering over the conductor assembly.

Jacket	FRPE
	dia. in inches
	0.700 or less	30 mils min average	24 mils minimum at any point
	0.701-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection.