UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21290
                        
                            Issued:2003-09-10
                    
                            Revised:2012-04-18
                    
                            Style
                            21290
                        
                            Multiple-conductor cable using extruded insulation and non-integral jacket
                    
			Rating80 deg C, 125 Vac, Horizontal flame.
		
			Conductor30 AWG - 20 AWG, solid or stranded.
		
			InsulationExtruded PE or FRPE, 12 mils minimum average thickness, 11 mils minimum thickness at any point.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional. Extruded FRPE, 6 mils minimum thickness at any point, over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded FRPE.
		
			Dia. of cable under jacket@Minimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			@ - Major dia if cable is flat or oval
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21290	Issued:2003-09-10
			Revised:2012-04-18


Rating	80 deg C, 125 Vac, Horizontal flame.

Conductor	30 AWG - 20 AWG, solid or stranded.

Insulation	Extruded PE or FRPE, 12 mils minimum average thickness, 11 mils minimum thickness at any point.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional. Extruded FRPE, 6 mils minimum thickness at any point, over the conductor assembly.

Shield	Optional.

Jacket	Extruded FRPE.
	Dia. of cable under jacket@	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	@ - Major dia if cable is flat or oval

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.