UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21293
                        
                            Issued:2003-09-26
                    
                            Revised:2019-11-07
                    
                            Style
                            21293
                        
                            Mltiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor36 AWG min, Solid or Stranded Round, metal coated or bare copper.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure. The designations of all styles of individual conductors used in making up the cable assembly shall be available.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid, paper, nylon, oriented polyethylene terephthalate, or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketExtruded TPU
		
			major dia. in inches
		
			0.350 or less15 mils min average12 mils minimum at any point
		
			0.351-0.700 dia30 avg24 min
		
			0.701-1.000 dia40 avg36 min
		
			1.101-1.500 dia54 avg48 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21293	Issued:2003-09-26
			Revised:2019-11-07


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	36 AWG min, Solid or Stranded Round, metal coated or bare copper.

Insulation	Labeled or complying with manufacturer's AWM Procedure. The designations of all styles of individual conductors used in making up the cable assembly shall be available.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid, paper, nylon, oriented polyethylene terephthalate, or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Covering	Optional.

Jacket	Extruded TPU
	major dia. in inches
	0.350 or less	15 mils min average	12 mils minimum at any point
	0.351-0.700 dia	30 avg	24 min
	0.701-1.000 dia	40 avg	36 min
	1.101-1.500 dia	54 avg	48 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.