UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21299
                        
                            Issued:2003-09-26
                    
                            Revised:2011-09-19
                    
                            Style
                            21299
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating105 deg C, 300 Vac, FT2 flame, Oil Resistant 60 deg C.
		
			Conductor16 AWG - 10 AWG. Stranded.
		
			InsulationExtruded TPE, 30 mils min average, 27 mils minimum at any point.
		
			AssemblyMinimum Fourteen conductors, same as type SJE, individually insulated conductors Assemblyor groups of insulated conductors cabled together to form a round cable. The length of lay of the twisted conductors or groups is 9.0 inches. Fillers, if used, shall be twisted with the conductors to make the conductor assembly have a circular cross section. A separator medium, talc, may be provided under the jacket
		
			JacketExtruded TPE.
		
			Diameter of core assembly under jacketMinimum average thickessMinimum thickness at any point
		
			0.551 - 0.900 inch80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSimilar to Type SJEO Flexible Cord.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21299	Issued:2003-09-26
			Revised:2011-09-19


Rating	105 deg C, 300 Vac, FT2 flame, Oil Resistant 60 deg C.

Conductor	16 AWG - 10 AWG. Stranded.

Insulation	Extruded TPE, 30 mils min average, 27 mils minimum at any point.

Assembly	Minimum Fourteen conductors, same as type SJE, individually insulated conductors Assemblyor groups of insulated conductors cabled together to form a round cable. The length of lay of the twisted conductors or groups is 9.0 inches. Fillers, if used, shall be twisted with the conductors to make the conductor assembly have a circular cross section. A separator medium, talc, may be provided under the jacket

Jacket	Extruded TPE.
	Diameter of core assembly under jacket	Minimum average thickess	Minimum thickness at any point
	0.551 - 0.900 inch	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Similar to Type SJEO Flexible Cord.